Characteristics
| Code | Type | Lubrication | P Contact pressure | V Velocity | PV value | T temperature | Specific gravity | Hardness | Elongation | Tensile strength |
|---|---|---|---|---|---|---|---|---|---|---|
| (kgf/㎠) | (m/min) | (kgf/㎠· m/min) | (℃) | (g/cm3) | (HRB) | (%) | (kgf/㎟) | |||
| (N/㎟) | (m/s) | (N/㎟· m/s) | (N/㎟) | |||||||
| 200S | Fe-sintering | Dry | 290(760) | 30 | 1,000(3,000) | -40 ~ +120 | 6.3~7.1 | 0~20 | 17 | 41 |
| 29(76) | 0.5 | 1.65(4.90) | ||||||||
| Periodic lubrication | 500(760) | 60 | 1,500(3,000) | (400) | ||||||
| 50(76) | (1) | 2.45(4.90) | ||||||||
| 200H | Fe-sintering | Dry | 450(750) | 30 | 1,000(3,000) | -40 ~ +250 | 6.3~7.1 | 35~45 | 28 | 48 |
| 45(75) | 0.5 | 1.63(4.90) | ||||||||
| Periodic lubrication | 700(1200) | 70 | 1,500(3,000) | (470) | ||||||
| 70(120) | (1.16) | 2.45(4.90) |
▶ (): Allowable static contact pressure (no sliding or sliding at extremly slow speed (0.1m/min or below))
▶ Above data is based on backing steel KS SS400 / SM45C and its mechanical characteristics may be changed when backing steel is changed.
▶ Value indicated above is general value and it can be changed without notification for improvement.
| Code | d | H7 | D | h6 | L | D1 | L1 | L2 | t | r | bxc |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SGO9834-025-D | 25 | +0.021 0 |
32 | 0 -0.016 |
40 | 40 | 30 | 3 | 6.3 | 3 | 0.6X0.3 |
| SGO9834-032-D | 32 | +0.025 0 |
40 | 50 | 50 | 40 | 4 | ||||
| SGO9834-040-D | 40 | 50 | 63 | 63 | 50 | 5 | |||||
| SGO9834-050-D | 50 | 63 | 0 -0.019 |
71 | 71 | 56 | 6.3 | 5 | |||
| SGO9834-063-D | 63 | +0.030 0 |
80 | 80 | 90 | 63 | 8 | 10 | 6 | 1.0X0.4 | |
| SGO9834-080-D | 80 | 100 | 0 -0.022 |
100 | 112 | 80 | 10 | 8 | |||
| SGO9834-100-D | 100 | +0.035 0 |
125 | 0 -0.025 |
125 | 140 | 106 | 12.5 | 10 | ||
| SGO9834-125-D | 125 | +0.040 0 |
160 | 160 | 180 | 132 | 16 | 12 | |||
| SGO9834-160-D | 160 | 200 | 0 -0.029 |
200 | 220 | 170 | 16 | 18 |