Service Range | Mechanical properties | ||||||||
---|---|---|---|---|---|---|---|---|---|
Material type | Lubrication | Pressure | Velocity | PV Value | Temperature | Density | Hardness | Elongation | Tensile Strength |
(kgf/㎠) | (m/min) | (kgf/㎠· m/min) | (℃) | (g/cm3) | (HB) | (%) | (kgf/㎟) | ||
(N/㎟) | (m/s) | (N/㎟· m/s) | (N/㎟) | ||||||
500SP | Dry | 300(1,500) | 30 | 1000 | '-40 ~+150 | 7.8 | 210 | 12 | 77 / 755 |
29(150) | 0.5 | 1.65 | |||||||
Periodic Lubrication | 300(1,500) | 60 | 2000 | ||||||
29(150) | (1) | (3.25) |
- ( ) : Allowable static contact pressure (no sliding or sliding at extremly slow speed (0.1m/min or below))
-Value indicated above is general value and it can be changed without notification for improvement.
-Please inquire separately about our bronze material for high-load applications for use in construction equipment and injection molding machines.
Code | W | L | T | W1 | Fixing Bolt Holes | Type | ||||
---|---|---|---|---|---|---|---|---|---|---|
ℓ1 | ℓ2 | W2 | d | Q'ty | ||||||
SLUPC | 52 | 150 | 20 | 12 | 50 | _ | 32 | 13 | 3 | A |
200 | 75 | _ | 3 | A | ||||||
250 | 75 | 50 | 4 | B | ||||||
72 | 150 | 30 | 22 | 50 | _ | 47 | 18 | 3 | A | |
200 | 75 | _ | 3 | A | ||||||
250 | 75 | 50 | 4 | B | ||||||
77 | 150 | 35 | 27 | 50 | _ | 52 | 3 | A | ||
200 | 75 | _ | 3 | A | ||||||
250 | 75 | 50 | 4 | B | ||||||
82 | 150 | 40 | 32 | 50 | _ | 57 | 3 | A | ||
200 | 75 | _ | 3 | A | ||||||
250 | 75 | 50 | 4 | B | ||||||
105 | 150 | 50 | _ | 80 | 3 | A | ||||
200 | 50 | 50 | 4 | B | ||||||
250 | 75 | 50 | 4 | B |