Service Range | Mechanical properties | ||||||||
---|---|---|---|---|---|---|---|---|---|
Material type | Lubrication | Pressure | Velocity | PV Value | Temperature | Density | Hardness | Elongation | Tensile Strength |
(kgf/㎠) | (m/min) | (kgf/㎠· m/min) | (℃) | (g/cm3) | (HB) | (%) | (kgf/㎟) | ||
(N/㎟) | (m/s) | (N/㎟· m/s) | (N/㎟) | ||||||
500SP | Dry | 300(1,500) | 30 | 1000 | '-40 ~+150 | 7.8 | 210 | 12 | 77 / 755 |
29(150) | 0.5 | 1.65 | |||||||
Periodic Lubrication | 300(1,500) | 60 | 2000 | ||||||
29(150) | (1) | (3.25) |
- ( ) : Allowable static contact pressure (no sliding or sliding at extremly slow speed (0.1m/min or below))
-Value indicated above is general value and it can be changed without notification for improvement.
-Please inquire separately about our bronze material for high-load applications for use in construction equipment and injection molding machines.
Code | W | L | I | l1 | Type | Bolt Q'ty |
---|---|---|---|---|---|---|
SWPVS | 30 | 80 | 30 | - | A | 2 |
100 | 50 | |||||
125 | 75 | |||||
160 | 110 | |||||
200 | 150 | |||||
225 | 175 | |||||
250 | 60 | 80 | B | 4 | ||
260 | 60 | 90 | ||||
280 | 60 | 110 | ||||
300 | 80 | 90 | ||||
320 | 80 | 110 | ||||
40 | 80 | 30 | - | A | 2 | |
100 | 50 | |||||
125 | 75 | |||||
160 | 110 | |||||
200 | 150 | |||||
50 | 80 | 30 | - | A | 2 | |
100 | 50 | |||||
125 | 75 | |||||
160 | 110 | |||||
200 | 150 | |||||
225 | 175 | |||||
250 | 60 | 80 | B | 4 | ||
300 | 80 | 90 | ||||
350 | 100 | 100 | ||||
400 | 120 | 110 | ||||
60 | 80 | 30 | - | A | 2 | |
100 | 50 | |||||
125 | 75 | |||||
160 | 110 | |||||
200 | 150 | |||||
225 | 175 | |||||
240 | 60 | 70 | B | 4 | ||
250 | 60 | 80 | ||||
260 | 60 | 90 | ||||
280 | 60 | 110 | ||||
80 | 80 | 30 | - | A | 2 | |
100 | 50 | |||||
125 | 75 | |||||
160 | 110 | |||||
200 | 150 | |||||
225 | 175 | |||||
240 | 60 | 70 | B | 4 | ||
250 | 60 | 80 | ||||
260 | 60 | 90 | ||||
280 | 60 | 110 | ||||
100 | 240 | 60 | 70 | B | 4 | |
260 | 60 | 90 | ||||
280 | 60 | 110 |