Service Range | Mechanical properties | ||||||||
---|---|---|---|---|---|---|---|---|---|
Material type | Lubrication | Pressure | Velocity | PV Value | Temperature | Density | Hardness | Elongation | Tensile Strength |
(kgf/㎠) | (m/min) | (kgf/㎠· m/min) | (℃) | (g/cm3) | (HB) | (%) | (kgf/㎟) | ||
(N/㎟) | (m/s) | (N/㎟· m/s) | (N/㎟) | ||||||
500F | Dry | 51(750) | 9 | 306 | '-40 ~+150 | 7.1 | 160 | 45<450> | 15 / 150 |
5(74) | 0.15 | 0.50 | |||||||
Periodic Lubrication | 82(750) | 15 | 490 | ||||||
8(73) | 0.25 | 0.8 |
- ( ) : Allowable static contact pressure (no sliding or sliding at extremly slow speed (0.1m/min or below))
-Value indicated above is general value and it can be changed without notification for improvement.
Code | W | L | Bolt Holes | Type | ||||
---|---|---|---|---|---|---|---|---|
W1 | W2 | L1 | L2 | L3 | ||||
SWP-FC | 28 | 75 | - | - | 45 | - | 15 | A |
100 | 50 | 25 | ||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | 125 | B | |||||
38 | 75 | 45 | - | 15 | A | |||
100 | 50 | 25 | ||||||
125 | 75 | |||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | 125 | B | |||||
48 | 75 | 45 | - | 15 | A | |||
100 | 50 | 25 | ||||||
125 | 75 | |||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | 125 | B | |||||
58 | 75 | 45 | - | 15 | A | |||
100 | 50 | 25 | ||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | 125 | B | |||||
75 | 75 | 25 | - | A | ||||
100 | 50 | |||||||
125 | 75 | |||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | 125 | B | |||||
100 | 100 | 50 | 25 | 50 | - | C | ||
125 | 75 | |||||||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 200(250) | -(125) | 50(25) | C(D) | ||||
125 | 125 | 37.5 | 75 | - | 25 | C | ||
150 | 100 | |||||||
200 | 150 | |||||||
250 | 200 | |||||||
300 | 200(250) | -(125) | 50(25) | C(D) | ||||
350 | 200 | - | 75 | C | ||||
150 | 150 | 100 | 25 | 100 | - | 25 | C | |
200 | 150 | |||||||
250 | 200 | |||||||
300 | 250 | -(125) | C(D) | |||||
200 | 200 | 150 | 150 | - | C | |||
250 | 200 | |||||||
300 | 250 | -(125) | C(D) |